Preparation Before Use

1. Ensure that the surrounding environment of the equipment is dry and well ventilated, and avoid the presence of harmful gases

2. Check if the equipment is properly grounded and ensure that the power supply is functioning properly.

3. Check if the supply materials of printing equipment, such as ink, paper, and printing fabrics, are complete

Equipment Startup

1. Connect the printing equipment to the power supply and ensure that the power switch is turned off.

2. Turn on the power switch on the device, start supplying power, and wait for the device to start up.

3. Select the corresponding textile printing program according to the device model and the instructions on the operating interface

Adjusting Printing Equipment

1. Adjust the various components of the equipment to ensure their normal operation and stability.

2. Adjust the color and concentration of the ink according to the texture and color requirements of the printed fabric

3. Set the printing speed and temperature of the printing equipment, and make slight adjustments as needed to ensure the best quality of the printing effect.

Carry Out Printing Operations

1. Place the fabric to be printed in the feeding area of the printing equipment and choose the correct feeding method based on the equipment model.

2. Ensure close contact between the fabric and the feeding part of the equipment, and customize the fabric according to the needs

3. Select the printing pattern on the operation interface, determine the printing position and size, and perform relevant settings

4. Start the printing equipment and start the printing operation. Observe the printing process to ensure that the printing quality and effect meet the requirements.